16
3. Disassembly and Reassembly
3-3 Removing the Assy-Frame Cooktop
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating the range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off the gas supply to the range before servicing. Check all gas lines and fittings for leaks before
operating the range . Replace all panels before operating the range . Failure to do so can result in death or
personal injury from explosion, fire, or asphyxiation
.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Parts
Explanation Photo
Explanation
Assy-Frame
Cooktop
ASSY GRATE
(2 SIDE / 1 CENTER)
BURNER CAP
BURNER HEAD
BURNER CUP
1.
Turn off the electrical supply
going to the range .
2.
Shut off the gas shut-off valve
in the gas supply line to the
range .
3.
Lift off the three grates .
4.
Lift off the 5 burner caps and
the 5 burner heads from the
burner cups .
5.
Remove screws from the
5 burner cups .
Assy-Frame
Cooktop
SPRING
COOKTOP
CHASSIS
MANIFOLD PANEL
FRAME
COOKTOP
ELECTRODE
6.
Push the 2 spring located
between the frame cooktop and
the chassis manifold panel with a
putty knife . The knobs should be
removed prior to disassembling
the cooktop frame and make
sure that the Chassis-Manifold
Panel is not damaged during the
operation .
7.
Push the cups down below the
surface of the frame cooktop .
NOTE
Make sure the electrodes are
below openings in the cooktop to
prevent interference and damage
during removal .
