26
3. Disassembly and Reassembly
3-11 Replacing the Burner Cup
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating the range . Failure to do
so can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off the gas supply to the range before servicing. Check all gas lines and fittings for leaks before
operating the range . Replace all panels before operating the range . Failure to do so can result in death or
personal injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Parts
Explanation Photo
Explanation
Burner cup
Locking Clip
Electrode
Burner Cup
Tube
Injector
1.
Turn off the electrical supply going
to the range .
2.
Shut off the gas shut-off valve in
the gas supply line to the range .
3.
Remove the frame cooktop .
4.
Using a tubing wrench on the gas
line fitting and a channel lock
wrench on the burner cup base,
firmly hold the cup base in place
while disconnecting the gas line .
5.
To remove the electrode from the
cup, squeeze the two outside edges
of the clip under the electrode
together while pulling to remove
the locking clip . Slide the electrode
and the wire from the cup . The
burner cup can now be removed .
