32
3. Disassembly and Reassembly
3-16 Replacing the Sensor-Thermistor(Upper/Lower)
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating the range . Failure to do
so can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off the gas supply to the range before servicing. Check all gas lines and fittings for leaks before
operating the range . Replace all panels before operating the range . Failure to do so can result in death or
personal injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Parts
Explanation Photo
Explanation
Sensor-
Thermistor
(Upper/
Lower)
SENSOR
THERMISTOR
Upper
Lower
CONNECTOR
1.
Turn off the electrical supply going to
the range .
2.
Shut
off the gas shut-off valve in the
gas supply line to the range .
3.
Open
the oven door and remove the
racks from inside the oven .
4.
Follow
Step 3-1 .
5.
Disconnect
wire connector of the
sensor thermistor to the rear of the
range .
6.
The
oven sensor thermistors are in
the upper right-hand corner of the
oven cavity and in the middle of the
oven cavity . Remove 2 screws and
carefully pull the sensor wire leads
until the wire connectors appear .
7.
Reverse
the order to install the oven
temperature sensor .
