46 English
Tr
ouble
shoo
ting
Troubleshooting
Problem
Cause
Action
Very large or
yellow surface
burner flames.
The wrong burner orifice
is installed.
Check the burner orifice size.
Contact your installer if you
have the wrong orifice (LP
gas instead of natural gas or
natural gas instead of LP gas).
Surface burners
light but oven
burners do not
light.
The oven door lock is
turned on.
The display will show the Lock
icon. Hold the oven door open
and press for 3 seconds.
The oven will beep and the
Lock icon will turn off.
The Gas Pressure
Regulator shut off switch
is in the off position.
Call a qualified service
technician.
Oven
Problem
Cause
Action
The oven control
beeps and displays
an information
code.
There may be an issue
with your oven. See the
“Information codes” chart
on page
Press
OFF/CLEAR
, and then
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.
Problem
Cause
Action
The oven will not
turn on.
The oven is not
completely plugged into
the electrical outlet.
Make sure the electrical plug
is fully inserted into a live,
properly grounded outlet.
A fuse in your home
may be blown or the
circuit breaker may have
tripped.
Replace the fuse or reset the
circuit breaker.
The oven
temperature is too
hot or cold.
The oven temperature
needs to be adjusted and
recalibrated.
.
The oven burner
will not shut off.
The oven door lock is
turned on.
The display will show the Lock
icon. Hold the oven door open
and press for 3 seconds.
The oven will beep and the
Lock icon will turn off.
The Sabbath function has
been activated.
SAb and the time of day will
show in the display. All other
controls and signals will be
deactivated. To turn off the
oven only, press
OFF/CLEAR
.
To cancel the Sabbath function
and reactivate the controls and
signals, press and hold
Bake
and
Number 1
simultaneously for
3 seconds.