English 27
Gas o
v
en
Chaging the settings
Demo mode
This is used by retailers for display purposes only. In this mode, the heating
element does not operate.
2
4
3
5
1
1.
Press and hold
for 3 seconds.
2.
Press
or
to set the number to 0.
3.
Press
START/SET
to enter to Demo mode.
4.
Press or
to select Off or On.
5.
Press
START/SET
to save the change.
Temperature adjust
The oven temperature has been calibrated at the factory. When first using the
oven, follow the recommended recipe times and temperatures. If it appears that
the oven is too hot or too cool, you can recalibrate the oven temperature. Before
recalibrating, test a recipe by using a temperature setting that is higher or lower
than recommended. The baking results should help you decide how much of an
adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C).
2
4
3
5
1
1.
Press and hold
for 3 seconds.
2.
Press
or
to set the number to 1.
3.
Press
START/SET
to enter to Temperature adjust.
4.
Press or
to enter an adjusting temperature value (-35~35).
5.
Press
START/SET
to save the changes.
NOTE
This adjustment does not affect the broiling or the self-cleaning temperature, and
is retained in memory after a power failure.
Summary of Contents for NX60 81 S Series
