4. Troubleshooting
67
This document can not be used without Samsung’s authorization.
Error Trouble Shooting
SYMPTOM
DIAGNOSIS
REMEDY
Touch control
keypads are not
working properly.
* Make sure the door lock feature is
not turned on.
* Unlock the controls by pressing and holding the
lock key for 3 or more seconds.
* Check to see if the Sabbath function
has been turned on.
* Press and hold the Sabbath pad(Bake+[
]) for at
least 3 seconds. The display will show the time
of day when the function is turned off.
* Check the display control harness and
connectors (CN400) on the PCB Touch
ʀͱ͝ϩθͱ̷ѣ̷͔ϩɇ̷̈࣍AĘƊߨߡߢ࣎ࢋ
on the PCB
* Reconnect securely or replace damaged
touch control harness.
* Check connectors (CN400, CNS701)
and/or the PCB for damage.
* Check the touch control panel
for damage
* Replace the PCB assembly.
(PCB and touch control glass panel.)
Oven lamp is not
working.
* Make sure the door lock feature is
not turned on.
* Unlock the controls by pressing and holding the
lock key for 3 or more seconds.
* Check for a burned out bulb.
*
Replace with a 40 watt appliance bulb.
* Check the harness connection(CN205),
the oven lamp relay (RY208).
* Repair or replace loose or disconnected harness.
* Replace
any
malfunctioning
relays.
* Measure the resistance across the light
ballast/socket terminals.
(Normal
ࡠॏ
)
* Replace the light ballast/socket.
* Replace
the
PCB.
The oven smells
and/or smokes
when it is initially
started.
* This is normal.
* The insulation around the oven will give off a
slight odor until the adhesive has cured. This
ϑ˵ͱЇ̷ʒ˝ͱɇиɇцɇ˙ϩʪθϩ˵ʪѣθϑϩʀͱЇΧ̷ʪͱ˙ͱЭʪ͝
uses.
* The oven is designed to burn off dirt and/or
foreign substances.
ࡐ
Ã˙
the oven is dirty, run a self-cleaning cycle.
A ventilation system should be used while the
oven is self cleaning.
