Français 91
Dépannag
e
Problème
Cause possible
Action
L'éclairage du four
(lampe) ne s'allume
pas.
Le verrouillage de la porte du
four est activé.
L'icône de verrouillage s'affiche. Maintenez
la porte du four ouverte et appuyez sur
le bouton
START/SET (DÉPART/RÉGLAGE)
pendant 3 secondes. Un signal sonore
retentit et le symbole de verrouillage
disparaît de l'écran.
La fonction Sabbath (Shabbat)
a été activée.
SAb et l'heure actuelle s'affichent. Toutes
les commandes et tous les signaux seront
désactivés. Pour annuler la fonction
Shabbat et réactiver le commutateur
d'éclairage et les autres commandes,
appuyez simultanément sur les boutons
Bake (Cuisson traditionnelle)
et
Touch
to Wake-Up (Touche de réveil)
pendant
3 secondes.
L'ampoule est desserrée ou
grillée.
Reportez-vous à la page
84
.
Le commutateur permettant
d'activer l'éclairage du four
doit être remplacé.
Contactez un technicien de maintenance
qualifié.
Le four émet une
fumée excessive
durant la cuisson.
Les aliments n'ont pas été
correctement préparés avant la
cuisson au gril.
Coupez l'excès de graisse et/ou les bords
gras susceptibles de se recourber.
Mauvais positionnement sur la
grille supérieure du four.
Reportez-vous au guide de cuisson au gril
à la page
43
.
Les commandes n'ont pas été
correctement réglées.
Reportez-vous à la page
39
.
La graisse s'est accumulée sur
les surfaces du four.
Un nettoyage régulier est nécessaire en cas
d'utilisation répétée de la fonction gril.
La cuisson est
terminée, mais
le ventilateur de
refroidissement
fonctionne toujours.
Le ventilateur fonctionne
automatiquement pendant un
certain laps de temps pour
ventiler l'intérieur du four.
Il ne s’agit pas d’un dysfonctionnement
du produit. Le ventilateur est conçu pour
fonctionner automatiquement durant un
certain de temps pour refroidir le four.
NY58J9850WS_DG68-00692A-00_CFR.indd 91
2015-07-07 11:46:28