74 English
Maint
enanc
e
Maintenance
Burner controls
Make sure all surface burner knobs are in the OFF position.
1.
Pull knobs off the control valve stems.
2.
Clean the knobs in warm, soapy water.
Then, rinse and dry them thoroughly.
3.
Clean the stainless steel surfaces using
stainless steel cleaner.
4.
Re-attach the knobs to the control valve
stems.
CAUTION
•
Do not clean the control knobs in a dish washer.
•
Do not spray cleansers directly onto the control panel. Moisture entering the electric
circuits may cause electric shock or product damage.
Cooktop surface
The porcelain-enameled cooktop surface needs to be kept clean. We recommend that you
remove food spills immediately after they take place.
1.
Turn off all surface burners.
2.
Wait until all burner grates cool down,
and then remove them.
3.
Clean the cooktop surface using a soft
cloth. If food spills run into gaps of the
burner components, remove the burner
cap and the head, and wipe out the
spills.
4.
When cleaning is finished, reinsert the
burner components, and put the burner
grates into position.
CAUTION
•
Do not use a steel-wool pad or abrasive cleaner, which can scratch or damage the enamel
surface.
•
Do not remove the cooktop surface to clean it. The gas lines leading to the burner
manifolds can be damaged, resulting in a fire or system failure.
NY58J9850WS_DG68-00692A-00_EN.indd 74
2015-07-07 11:45:21