80 English
Maint
enanc
e
Maintenance
To perform the self-cleaning cycle
Make sure the door lock is released. Remove all racks from the oven cavity.
3
5
2
1.
Make sure the oven door is closed completely and unlocked.
2.
Press the
Self Clean
button, and then select the cleaning time. See the table below.
Once
Twice
Three times
3-hour cycle
5-hour cycle
2-hour cycle
3.
Press the
START/SET
button. The oven door is locked and the oven begins to heat up.
4.
When the self-cleaning cycle is complete, the oven beeps 10 times. The door will remain
locked and the Lock icon will blink until the oven temperature falls below 400 °F (200 °C).
5.
When the Lock icon changes to an open lock, you can open the oven door. The Lock icon
changes to an open lock when the oven temperature drops below 400 °F (200 °C).
6.
Press the
OFF/CLEAR
button to display the time of the day.
CAUTION
•
Do not use the surface burners while the gas oven is performing a self-cleaning cycle.
WARNING
•
Be sure all controls are OFF and all surfaces are COOL before cleaning any part of the
range.
NOTES
•
Turn off the surface burner while the
oven is performing a self cleaning cycle.
Self-clean will not operate if a surface
burner is on.
NY58J9850WS_DG68-00692A-00_EN.indd 80
2015-07-07 11:45:23
