English 89
Tr
ouble
shoo
ting
Problem
Possible cause
Action
Surface burner
clicks during
operation.
The control knob has been
left in the LITE position.
After the burner lights, turn the control
knob to a desired setting.
If the burner still clicks, contact a
service technician.
The burners do
not burn evenly.
Surface burner components
and caps are not assembled
correctly and level.
See page
75
.
Surface burners are dirty.
Clean surface burner components.
(See page
74
.)
Very large or
yellow surface
burner flames.
Wrong orifice is assembled.
Check the burner orifice size and
contact your installer if you have
the wrong orifice (LP gas instead of
natural gas or natural gas instead of
LP gas).
Surface burners
light but oven
burners do not
light.
The oven door lock is
turned on.
The display will show the Lock icon.
Hold the oven door open and press the
START/SET
button for 3 seconds. The
oven will beep and the Lock icon will
turn off.
Gas Pressure Regulator
shut off switch is in the ‘off
position.
Call a qualified service technician.
NY58J9850WS_DG68-00692A-00_EN.indd 89
2015-07-07 11:45:25