16
English
Before you start
Before you start
Location of the surface elements and controls
01
02
03
05
04
07
08
06
01
Left Rear
(7”, 1500 W)
02
Center
(6”/9”, 3300 W)
03
Right Rear
(6”, 1200 W)
04
Left Front
(7”, 1500 W)
05
Right Front
(5”/8”, 2000 W)
06
Control Knob
07
Hot surface indicator
08
Smart Connect button
Knob lighting
Press and turn the knob to a desired setting.
The indicator turns on and confirms the
selected setting.
Hot surface indicator
• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• The hot surface indicator turns off only when the cooking zone has cooled
down to approximately 150 °F.
Cooking areas
• The cooking areas on your cooktop are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
•
Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
• When a control is turned on, you can see a glow through the glass cooking
surface.
The element will cycle on and off to maintain the preset heat setting,
even at high settings.
• For more information on selecting proper types of cookware, refer to the
section “
Using the proper cookware
”.
Initial cleaning
Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass
cleaner.
WARNING
Do not use caustic or abrasive cleaners. You can damage the surface.
NZ30K6330R_DG68-00821A-01_EN+MES+CFR.indb 16
9/7/2016 12:07:51 PM
