English - 27
English - 27
3.
Use the
Timer setting selectors
(
or ) to set the desired amount of time,
for example, 15 minutes, after which the
cooking zone will automatically switch
itself off. The safety shutoff is now
activated.
4.
To cancel the timer settings, select the
target burner and hold down the
Timer
control
sensor for 3 seconds. This
will cancel the burner’s timer settings
with a beep.
If holding down the
Timer control
sensor for 3 seconds without selecting a burner, this will cancel
the timer settings of the last changed burner.
To display the time remaining for any of the cooking zones, use
the
Timer control
sensor.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the
Timer setting selectors
( or
). After the set period of time has elapsed, the cooking zone
automatically switches itself off, an acoustic signal sounds as
confirmation and the timer display indicates.
If you tap the
Timer control
sensor without selecting a
cooking zone, the display turns on but no timer settings is
applied.
To change the settings quicker, touch and hold any of the
or
control
sensors until the desired value is reached.
05
BEFORE Y
OU BEGIN & HOB USE
NZ63H57470K_EF_DG68-00548A-00_EN.indd 27
2014-04-07 �� 5:33:06