- 21 -
This document can not be used without Samsung’s authorization.
4-3-6
YES
NO
YES
YES
YES
NO
NO
IGBT Sensor Short Information ( )
Is the sub wire sequence matched
with PCB schematic?
Connect the sub wire.
Replace the sub wire.
S/W Information
Is the sub wire connected?
(from Assy-Inverter Module to
Assy Touch PCB)
The sensor has defect.
Replace the Assy-Inverter Module PCB.
Replace the
Assy-Inverter Module PCB.
Perform the operation again and check
if it is working properly.
After Power -> On, does
the symptom continue?
NO
Is the sensor's real resistance a
shorted circuit?
: check if the sub wire is damaged
if the housing is inserted into the
connector of the PCB.
