- 5 -
This document can not be used without Samsung’s authorization.
2-5 Installing the hob
2-5-1 Installing into the countertop
A
A. Serial number
NOTE
Make a note of the serial number on the
appliance rating label prior to installation.
This number will be required in the case
of requests for service and is no longer
accessible after installation, as it is on the
original rating plate on the underside of the
appliance.
NOTE
Pay special attention to the minimum space and clearance requirements.
NOTE
The bottom of the hob is equipped with a fan. If there is a drawer under the hob
it should not be used to store small objects or paper, since they could damage the
fan or interfere with the cooling if they are sucked into it.
01
02
No.
Explanation
Size
01
Height of
ventilation hole
Min 2 mm
02
Width of
ventilation hole
560 mm
04
05
06
07
08
09
10
11
12
02
03
01
No.
Explanation
Size
01
Check 4 Point
02
Drill diameter
Ø 6
03
Right angle of cutting point
90 °
04
Width Size
560±1 mm
05
Height Size
490±1 mm
06
Curve Size
R3
07
Size of table thickness
Max 50 mm,
Min 20 mm
08
Distance between end of table and cutting point (Top-side)
Min 60 mm
09
Height of table
Min 600 mm
10
Distance between end of table and cutting point (Left-side)
Min 60 mm
11
Distance between end of table and cutting point (Right-side)
Min 60 mm
12
Distance between end of table and cutting point (Bottom-side)
Min 50 mm
