22 English
Hob use
Hob use
Flex control
The Flex function can operate complete left side cooking zone for using large size
cookware. (example : oval cookware, fish kettle)
1.
Touch the
Flex zone Plus
sensor.
2.
For setting and adjusting the power
level, touch the Heat setting sensor.
NOTE
•
If you touch the
Flex zone plus
sensor during operating, Flex zone plus
function will be off.
•
If you touch
Flex zone Plus
sensor while each burner operation different level,
burner set at a high level.
•
Touching the
Flex zone Plus
sensor while the Flex zone is operating turns off
the Flex zone.
•
When moving or adding cookware to a new Flex zone Plus, cancel the current
operation, and then press the corresponding sensor to activate the cooking
zone.
Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the
Power Boost
function,
Power Management automatically reduced the heat setting of cooking zone.
1
2
3
4
•
No.1 and No.2 is paired
•
No3. and No.4 is paired
The indicator for this cooking zone
alternates for some seconds between the set
heat setting and the maximum possible heat
setting. After then, the indicator changes
from the set heat setting to maximum
possible heat setting.
Pause
The
Pause
function simultaneously switches all cooking zones that are
switched on to the low power setting and then back to the heat setting that was
previously set. This function can be used to briefly interrupt and then continue the
cooking process e.g. to take a telephone call.
When the
Pause
function is activated, all touch sensors except for the
Pause
,
Lock
and the
On/Off control
sensors are disabled. To resume cooking,
touch the
Pause
sensor again.
Control Panel
Display
To Switch On
Touch
Pause
To Switch Off
Touch
Pause
Return to previous power level
NZ64K7757BK_EU_DG68-00790A-00_EN.indd 22
2/29/2016 11:29:43 AM
