English 23
Oper
ation (NZ8*****7**)
Smart Connect
The hob has built in Wi-Fi module that you can use to sync the hob with the
SmartThings app. On the phone app, you can:
•
monitor the operating status and the power level settings of the hob elements.
•
monitoring the timer settings.
Functions that can be operated from the SmartThings app may not work smoothly
if communication conditions are poor or the product is installed in a place with a
weak Wi-Fi signal.
How to connect the hob
Before you can use the remote features of your Samsung hob, you must pair it to
the SmartThings app.
1.
Download and open the SmartThings app on your smart device.
2.
Press the
Pause
key for approximately 5 seconds to turn on the "AP".
3.
While the connection is being made, the Wi-Fi indicator will links. Once the
process is complete, the indicator glows without blinking. Now the hob is
connected successfully.
4.
If the Smart Connect Wi-Fi indicator does not turn on, follow the instruction in
the app to reconnect.
NOTE
•
Make sure to set the Smart Connect function only when no hob operation is in
process.
•
For further instructions, refer to the web manual at www.samsung.com
Wi-Fi On/Off
To change the Wi-Fi On/Off, repeat steps
1
to
3
.
1.
Press the
On/Off
key for approximately 1-2 seconds to turn the hob on.
2.
Press the
Lock
key for approximately 3 seconds to turn on the child safety
lock.
3.
Press the right front
Max Boost
key for approximately 3 seconds.
Maximum power limit
This function allows you to adjust the maximum power of the unit.
1.
Keep the power off.
2.
Press the left front
Max Boost
key and left rear
Timer
key at the same time
for approximately 3 seconds.
3.
Press the right front
Timer
key for approximately 3 seconds.
4.
Press the left front
Timer
key for approximately 1.5 seconds.
The displays will show
. and current maximum power.
5.
You can adjust the power limit using the
Lock
key. (3000 W, 4000 W,
7400 W)
6.
Press the
On/Off
key to set the setting.
NOTE
In low-power (3000 W, 4000 W) mode, the power level will be adjusted
automatically.
Sound on/off
1.
Press the
On/Off
key for approximately 1-2 seconds.
2.
Press the right front
Timer
key for 2 seconds within 10 seconds after the
power has turned on.
3.
Sound will turn off and
will be displayed in the display.
4.
To change the sound setting, repeat steps 1 and 2. Sound will turn on and
will be displayed in the display.
NOTE
It is not possible to change the sound settings after 10 seconds from turning the
power on.
