24 English
Oper
ation (NZ8*****8**)
Operation (NZ8*****8**)
Hood control
This product features a Bluetooth device that you can use to connect the hob to
Samsung hood control models. Through the Bluetooth connection, you can use the
hood control function on the SmartThings app.
To find out more about Samsung hood control-enabled models, visit www.
samsung.com.
To connect to a hood control model
1.
Follow the Bluetooth instructions of the hood control model and activate the
Bluetooth connection.
2.
Press and hold the right front
Timer
and
Pause
keys simultaneously to
make the Bluetooth connection. When the Bluetooth connection is successfully
established,
appears on the display.
NOTE
•
If the Smart Connect connection is not successful, you cannot use the
SmartThings app to monitor and control the hood.
•
Without a Smart Connect connection to the hob, you can use a Bluetooth
connection to pair the hob with the hood and sync them. To do this, follow
steps 2 and 3 above.
Operation (NZ8*****8**)
Switching the appliance on
The appliance is switched on using the
On/Off
key. Press the
On/Off
key for
approximately 1-2 seconds.
NOTE
After the
On/Off
key has been actuated to switch on your appliance, a power
level must be selected within approximately 20 seconds. Otherwise, the appliance
will switch itself off for safety reasons.
Switching the appliance off
To completely switch off the appliance, use the
On/Off
key.
Press the
On/Off
key for approximately 1-2 seconds.
NOTE
After switching off a single cooking zone or the entire cooking surface, the
presence of residual heat will be indicated in the digital displays of the
corresponding cooking zones in the form of an
,
two steps for “hot”.
The temperature is lowered,
,
wil be disappeared.
Selecting cooking zone and power level
1.
For selecting the cooking zone, press the corresponding
Cooking zone
key.
2.
For setting and adjusting the power level, use the Control bar or Control key
or Control knob.
Control bar
Control Knob
NOTE
•
The default level is set to 15 when selecting the cooking zone.
•
If more than one key is pressed for longer than 8 seconds,
will show in the
cooking zone display.
Operation (NZ8*****7**)
