2–3
Champ Connector
The champ connector is used for connecting with DBSs.
8BSI Card
The 8BSI card can only be installed in a DCS system. The 8BSI card has more features and more
enhanced performance than the 4BSI card.
!
Each 8BSI card can connect up to eight DBSs and have 32 simultaneous calls (four per DBS).
!
48 DECT handsets can be registered to a single card.
!
You can easily download new software from a console terminal connected to the RS-232C
connector on the front panel of the card.
!
Power feeding of each port can be controlled remotely using the software.
!
The Watchdog timer prevents the system from operating abnormally due to voltage change.
!
The system monitoring feature is enhanced by using a manual reset switch and a non-
maskable interrupt reset switch.
The card is illustrated below and is installed as described in Chapter 4,
Installation.
Champ Connector
The champ connector is used for connecting with DBSs.
RS-232C Connector
This 9-pin connector is used for connecting a console terminal to download the 8BSI card soft-
ware (see Chapter 6).
Champ connector
RS-232C connector
Front
View
Summary of Contents for Office DECT 8000
