CHAPTER 2.
Ошибка
!
Стиль
не
определен
.
2-166
© SAMSUNG Electronics Co., Ltd.
(Continued)
Timer Name
Default
Range Unit
Description
TSW CONN. DELAY
0
0-10 SEC
When incoming trunk makes outgoing call
to another trunk, the system connects
voice path after this time.
UCDS AUDIO
ALARM
0
0-990 SEC
When an AA card is installed and the digital
UCD package enabled, this counter
determines the maximum number of seconds
a call has been waiting at the UCD group
before the UCD group’s SUPV key begins to
flash along with an audio alarm. For more
UCD alarm conditions, see MMC 500.
UCDS VISUAL
ALARM
0
0-990 SEC
When an AA card is installed and the digital
UCD package enabled, this counter
determines the maximum number of
seconds a call at the UCD group before
the UCD group’s SUPV key begins to flash
as an alarm. For more UCD alarm
conditions, see MMC 500.
VMS UCD MSG
TIME
5
1-99 SEC
When this timer expired, the call return to
idle member. Requires SVM-800.
VOICE DIAL DELAY
8
5-15 SEC
This timer monitors the duration of
interaction between main software and
Voice Dialler. If there is no response from
Voice Dial card within this time, the system
decide the voice dialling is fail.
VOIP RE-ROUTE TM
5
2-25 SEC
When the outgoing call is made via VOIP
trunk and does not receive ACK message
from called party within this time, the call is
treated as fail.
When the value is ‘0’
Certain timers are disabled when the value is ‘0’.
CONDITIONS
NONE
DEFAULT DATA
SEE DESCRIPTION
SOME TIMERS ARE DEPEND ON COUNTRY
