OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-179
[508] CALL COST
Allows the system administrator to set the Call Cost attributes generated by the system
during a call. This information can be displayed on the phone LCD during a call or as an
SMDR record.
No
Item
Description
0
UNIT COST PER MP
When the system is installed to receive MP on a C. O. outgoing
call. It is used for generating total call cost by multiplying it by the
number of pulses. Allows a maximum value of 9999.
1
CALL COST RATE
This generates additional call cost calculated by multiplying this
rate by the original call cost. Ranges from 100 through 255.
Call Cost
Changing this value when there is a call in progress may result in an inaccurate
call cost. This Meter Pulse Detection(MPD) facility requires the MPD version of
the trunk card.
CONDITIONS
NONE
DEFAULT DATA
UNIT COST PER MP 100 PERCENT
CALL COST RATE 100 PERCENT
ACTION DISPLAY
1) Press Transfer button and enter 508.
Display shows:
UNIT COST PER MP
0100PESET
Æ
2) Dial 0 OR 1.(e.g., 1)
OR
CALL COST RATE
100 %
Æ
Press Volume button to select, and press
Right Soft button to move cursor.
3) Enter new value.(e.g., 110 for 110 percent)
System returns to step 2.
CALL COST RATE
110 %
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 110 STATION ON/OFF: CALL COST OPTION
