OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-207
[610]ASSIGN R2 CALL TYPE (China Only)
In China, the R2MFC signaling is different from according to dialling digit. This MMC is
used to assign the call types for each dialling digit.
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 610.
Display shows first station:
R2 CALLTYPE(001)
DGT: TYPE:1
2) Dial code index number 1-100.(e.g., 005)
OR
R2 CALLTYPE(005)
DGT:_ TYPE:1
Press UP or DOWN key to selected index number and
press Right Soft button to move cursor.
3) Enter digit via dial keypad(maximum of four digits,
e.g.,002) and press Right Soft button to move cursor.
R2 CALLTYPE(001)
DGT:002 TYPE:1
4) Enter call type.(1-6, e.g., 5)
OR
R2 CALLTYPE(001)
DGT:002 TYPE:5
Press UP or DOWN key to make selection and press
Right Soft button.
5) Press Transfer button and enter to save and exit.
OR
Press Speaker button to save and advance to next MMC.
RELATED ITEMS
MMC 418
R2MFC SIGNALING
