CHAPTER 2.
Ошибка
!
Стиль
не
определен
.
2-268
© SAMSUNG Electronics Co., Ltd.
EXAMPLES OF VM/AA OPERATION (IN BAND DTMF DIGIT STRING)
In the following example, all call and type data is turned on unless otherwise stated. X is
the separator digit, all-default values are used in these examples and [ ] is not used.
A DIL 701 calls a VM/AA port or group:
[*] + [701] + [ ] + [ ]
In the above example, if Trunk Line information is not used:
[ ] + [ ] + [ ] + [ ](Nothing is used)
DIL 701 calls a call-forwarded station(205):
[#] + [205] + [X] + [701]
In the above example, if forward information is not used:
[ ] + [205] + [X] + [701]
In the above example, if forward and DN2/Trunk Line information is not used:
[ ] + [205] + [ ] + [ ]
DIL 701 calls group 501 that overflows to VM/AA:
[#] + [501] + [x] + [701]
In the above example, if overflow information is turned off:
[ ] + [ ] + [ ] + [ ](Nothing is sent)
A DID call rings the VM/AA directly:
[B] + [9999] + [ ] + [ ]
9999 are the DID digits from Trunk Line
In the above example, if did information is turned off:
[ ] + [9999] + [ ] + [ ]
A station transfers(blind or screened) a call(Trunk Line, DID or intercom) to VM/AA group
or port. When the transferring station hangs up(blind transfer):
[ ]+[ ]+[ ]+[ ](Nothing is sent)
A station(202) transfers a Trunk Line call(702) to a station(225) that is Call Forward All to
a VM/AA group or port. When the transferring station hangs up(blind transfer) and the
VM/AA group or port answers:
[#] + [225] + [x] + [702]
A station(202) transfers a Trunk Line call(702) to a group(501) that overflows to a VM/AA
group or port:
[#] + [501] + [X] + [702]
