OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-373
MGI2 and MGI1 parameters are followed:
No
Parameter
Description
Default
0 CODEC
FRAME
Selects which audio CODEC compression will be used
and the transmission interval time of VoIP packets
generated by the MGI card. MGI2 supports G.729A(8 K)
and G.711(64 K). MGI1 supports G.711 only.
G.729A(MGI2)-
40 ms
1 ECHO
CANCEL
This function removes echo that is generated by voice
reflection and packet delay. This sets ENABLE only,
cannot changed.
ENABLE
2
SILENCE SUP
This parameter determines whether silence
suppression is used This prevents transmission during
the silence period of a call, and conserves bandwidth
when enabled.
DISABLE
4
MIN JITTER
Decides the minimum time to consider delay for jitter
adjustment.
The range is 020~300 ms
30
5
MAX JITTER
Decides the maximum time to consider delay for jitter
adjustment.
The range is 020-300 ms.
100
6
DTMF TYPE
There are two types of DTMF transmission: INBAND,
which is industry standard(H.245) type DTMF transport.
This sets INBAND only, cannot changed.
INBAND
7
TOS FIELD
An eight-bit binary value that will be utilized by external
routers, switches, etc(that optionally support TOS-bit
prioritization)-to identify the transport-priority value of
data packets generated by the MGI card. This value
can be left at default value(00000) if your network
infrastructure does not support this method of
bandwidth management.
all bits 0
CONDITIONS
NONE
DEFAULT DATA
SEE DESCRIPTION
