OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-375
[836] H.323 GK OPTIONS
Provides a means to set the H.323 gatekeeper parameters for an optional external industry-
standard H.323 network gatekeeper, using Registration, Admissions, and Status signaling
(RAS). The settings are system wide.
When changing IP
When changing any IP address/value, listed below, three digits must be input for
each(octet) field. Example 192.168.1.10 input must be: 192 168 001 010
No
Parameter
Description
Default
00 GK CONNECTION This enables or disables the H.323 call to connect to
a gatekeeper.
DISABLE
01 GK ROUTING
This enables or disables routing of calls through a
gatekeeper.
DISABLE
02 GK IP ADDRESS
This is gatekeeper’s IP address.
0.0.0.0
03 GK NAME
This is alphanumeric name identifier of the
gatekeeper. An entry of 16 characters.
‘Gatekeeper’
04 ALTER
GK
IP
ADDR
This provide for an alternate gatekeeper address.
0.0.0.0
05 H.323
GATEWAY
ID
This is the H.323 identifier used by the MGI when
registering with the gatekeeper. This can be up to 32
characters.
‘OfficeServ’
06 E.164
GATEWAY
NO
This is the E.164 identifier used by the H.323 trunk
when registering with the gatekeeper. This can be up
to 16 digits in length.
1234
07 GK KEEP ALIVE
This is the timer that the MGI uses to acknowledge
the presence of the gatekeeper. The range is
000~999 seconds.
0 sec
08 GK DOWN ROUTE This provides an alternate route in case the primary
gatekeeper is down. Selections are PSTN or ALTER
GK.
PSTN
09 GK RAS TYPE
Select if AUTO or MANUAL, depending on your
gatekeeper’s capabilities.
AUTO
11 URQ
REASON
MODE
Select ON or OFF for usage of Un-register Request
RAS(URQ) messages.
ON
12 RRQ FAIL TIME
Programs the time frame to re-send Registration
Request RAS(RRQ) messages to a gatekeeper.
The range is 1~99.
30 sec
13 GRQ SEND
Select ON or OFF for usage of Gatekeeper RAS
Request(GRQ) messages.
OFF
