OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-391
SIP PARAMETER
No
Parameter
Description
0
RE-TRANS T1
When using an unreliable transmission protocol such as UDP,
retransmission is required when no reply is received. RE-TRANS.
T1 TIME is the initial retransmission interval defined in RFC2543.
1 RE-TRANS
T2 Maximum
retransmission interval defined in RFC 2543
2
RE-TRANS T4
RFC 2543 defines this parameter for various purposes.
For example, this parameter can be used as the time waited by User
Agent Server(USA) after receiving ACK message in an unreliable
transmission protocol.
3
GEN RING TM
When using an unreliable transmission protocol, the server cannot be
sure if the client has received the last reply.
Thus, the server must retransmit the reply for as long as this time until
it receives the requested retransmission. For example, this parameter
can be used as the waiting time after sending 200 OK for INFO.
4
INV RING TM
When using an unreliable transmission protocol, the client cannot
verify if the server has received the ACK returned to the server for the
INVITE Final Response. The client waits for as long as this time after
sending the ACK for the Final Response.
5
GEN NO RESP
Waiting time until canceling SIP related Request.
6
INV NO RESP
Waiting time until canceling SIP INVITE Request.
7
REQ RETRY
Waiting time until receiving final response for SIP related Request.
8
PROVISIONAL
On receiving Provision Response, the User Agent must wait for as
long as this time until Timeout.
CONDITIONS
NONE
DEFAULT DATA
SEE DESCRIPTION
ACTION DISPLAY
1) Press Transfer button and enter 845.
WLAN: SYSTEM ID
WBS24
2) When the cursor is at WLAN, press UP or DOWN
and select WLAN, WBS, or SIP.
WLAN: SYSTEM ID
WBS24
3) Press Soft button and move to the SYSTEM ID.
When the cursor is below SYSTEM ID,
WLAN: SYSTEM ID
WBS24
press UP or DOWN key and select
the setting menu for WLAN.
