OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-409
(Continued)
No
Code
Alarm Name
Definition
81
MNF17
PSU Alarm Rec
A second PSU has been recognized when added after
alarm condition of
Alarm Data = Cabinet, Slot(Cx-Syy)
82
MNF18
SLI Fault
An SLI card has been detected as out of service via an
internal CODEC test.
Alarm Data = Cabinet, Slot, Port(Cx-Syy-Pzz)
83
MNF19
SLI Recovery
An SLI card detected as out of service has been
detected as recovered and is in service via internal
CODEC test.
Alarm Data = Cabinet, Slot, Port(Cx-Syy-Pzz)
84
MNF20
PSUB Alarm
Indicates there are over 120 ports in a cabinet with two
PSU.
Alarm Data = Cabinet, Slot(Cx-Syy)
85
MNF21
DSS Alarm
System capacity of 64 button DSS modules has been
exceeded.
86
MNF26
SIO RxQ Over
SIO Tx Queue full error has occurred in the MCP2.
Alarm Data = SIO number(SIO: x)
87
MNF27
SIO RxQ Under
SIO Tx Queue under error has occurred in the MCP2.
Alarm Data = SIO number(SIO: x)
88
MNF28
LAN Printer Err
LAN printer error has occurred in the MCP2.
Alarm Data = Data Type(SMDR)
89
MNF29
LAN Printer Rec
LAN printer error has recovered in the MCP2.
Alarm Data = Data Type(SMDR)
90
MNF30
SPNet Link Error SPNet Link Connection Error
Alarm Data = MMC 0 LINK ID INDEX Number
91 MNF31 SPNet
Send
Error
SPNet Message sending Error
Alarm Data = xx:yyyy:zz
xx: SPNet TRK INDEX, yyyy:SPNet TRK number,
zz: MMC820 LINK ID INDEX number
MNG--
Minor Error
Minor Fault without Alarm Buffer saving
92 MNG01 Phone
Disconnect
Indicates the Phone is disconnected.
Alarm Data = Tel number or Cx-Syy-Pzz
93
MNG02
Phone Connect
Indicates the Phone is connected.
Alarm Data = Tel number or Cx-Syy-Pzz
94
MNG03
Off Hook Alarm
Indicates the Extension is Off Hook Alarm time over.
Alarm Data = Tel number or Cx-Syy-Pzz
95
MNG04
On Hook
Indicates the Off Hook Alarm Extension is on hook.
Alarm Data = Tel number or Cx-Syy-Pzz
96
MNG05
MGI Packet Loss Indicates the MGI connection RTP packet loss is more
than 10 %.
Alarm Data = Tel number or Cx-Syy-Pzz
