OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-411
[853] MAINTENANCE BUSY
This MMC is used to place stations, trunks, and common resources equipment in a
maintenance busy condition. This can be used to isolate suspected intermittent problem
equipment. Stations placed in maintenance busy will behave like a station in DND when
called. The calling stations display(if equipped) will show ‘MADE BUSY’ when called.
Stations receiving DID or E & M type calls will receive a DND/No more calls tone.
The station display will still function with station and date.
When the busy station is accessed, it will function like a locked all station. Trunks made
busy can not originate calls. Ring down type trunks will still ring the programmed
destination. Common resource equipment such as DSP’s, CID DSP’s and miscellaneous
equipment such as page ports, AA ports or voice mail card ports can also be placed in a
maintenance busy state.
MAINTENANCE BUSY OPTIONS
No
Option
Description
0 TRK
Trunks
1 STN
Stations
2 PAGE
Page
Ports
3 AA
Auto
Attendant
card
ports
4 DTMFR
DTMF
Receiver(4/DSP)
5 CID
CID
Receiver(14/DSP)
6 R2MFC
R2MFC
Receiver(8/DSP)
7 CONF
GRP
#01-24
8 MGI
MGI
ports
DTMFR/CID/R2MFC DSP
Cases of DTMFR, CID or R2MFC DSP selection when DSP is not mounted
display will show NONE. If mounted display will show IDLE by default.
CONDITIONS
NONE
DEFAULT DATA
ALL IDLE
