OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-33
[118] CONFERENCE GROUP
Allows the system administrator or technician to set one touch conference group using
GCONF key for any station. One station can use up to 5 conference groups, and each group
can be set 4 member except self station.
On conference member, allows both internal station or station group number and outgoing
access code plus external telephone number.
CONDITIONS
In MMC 612 Conference Group Station set USED station only uses this feature.
Only phones with large LCDs may be assigned to a conference group.
In case of a large LCD phone, system set to USED automatically.
INPUT CONFERENCE GROUP
Refer to ‘INPUT CHARACTERS’ in ‘MMC [104] STATION NAME’.
Conference group names are written using the keypad. Each key press selects a character.
Pressing the dial pad key moves the cursor to the next position.
For example, if the group name is ‘SAMSUNG’, press the number ‘7’ four times to get the
letter ‘S’. Now press the number ‘2’ once to get the letter ‘A’. Continue selecting characters
from the table below to complete your message. Pressing the bottom left programmable
button will change the letter from upper case to lower case.
DEFAULT DATA
NONE
ACTION DISPLAY
1) Press Transfer button and enter 118.
Display shows:
[201] GRP(1)NAME
2) Dial
station
number.(e.g.,
205)
OR
[203] GRP(1)NAME
Press Volume button to select station and press
Right Soft button to move cursor.
3) Dial 1~5 to select group.
OR
[203] GRP(1)NAME
Press Volume button to select group and press.
Right Soft button to move cursor.
