OfficeServ 500 Programming Guide
© SAMSUNG Electronics Co., Ltd.
2-47
[202] CHANGE FEATURE PASSCODE
Used to change the passcodes for the following features.
No
Feature
Description
0
RING PLAN
This is the passcode required to place the system in different ring
plans(RP) or change the ring time override(RTO).
1
DISA ALARM
This is the passcode required to clear a DISA ALARM generated when
the number of DISA attempts are exceeded.
2
ALARM CLR
This is the passcode required to clear a ALARM generated by the
disconnection of BI-PMS SIO. -Available in Hotel/Motel enabled only.
3
AA RECORD
This is the passcode required to record prompts for use with the AA
ports on the Auto Attendant card.
5
DELETE
This is the passcode required to registration of DECT phone.
6
WLAN REGST
This is the passcode required for registration of a WIP phone.
CONDITIONS
y
The passcode is four digits long. Each digit can be 0~9.
y
The current passcode is required for this MMC.
DEFAULT DATA
RING PLAN: 0000
DISA ALARM: 5678
ALARM CLR: 8765
AA RECORD: 4321
DECT REGST: 4321
DELETE: 9999
WLAN REGST: 0000
ACTION DISPLAY
1) Press Transfer button and enter 202.
Display shows:
CHANGE PASSCODE
RING PLAN :0000
2) Press Volume button to make selection and press
Right Soft button to move cursor to passcode entry.
CHANGE PASSCODE
AA RECORD :4321
3) Enter new passcode via digits from dial keypad.
Press Right Soft button to return to step 2.
CHANGE PASSCODE
AA RECORD :9999
Continue to change other passcodes.
