59
SVMi E-Series
This section describes how to setup and use the various features available to a
Subscriber. A Subscriber is a person that has been authorized access to the vari-
ous features and services available in the SVMi E-Series. Please review this section
carefully before you use your Authorized Features and Services, known as
Subscriber Services.
Voice Mail is one of the Subscriber Services available. Your voice mail box has the
capability of storing private messages, and offers a number of options for sending
or redirecting messages as well as provides several ways to notify you of new mes-
sages.
Another very common Subscriber Service is Access Manager. This allows you con-
trol over when and where you receive your calls as well as what to speak to your
callers in the event you are unable to speak to them directly. The ‘events’ are
referred to as “Call Conditions”. No-Answer, Busy, and Blocked are the most com-
monly used Call Conditions.
This guide can be used by Subscribers from within the office or from telephones
outside the office. The basic operation is the same, but the access method will be
different.
See the SVMi E-Series Subscriber Services Menu Diagram for more
Note that some features and prompts detailed here may not be available to all
Subscribers. See your System Administrator if you have questions about feature
availability.
2.
ALL FWD NO.
3.
BUSY FWD NO.
4.
NOANS FWD NO.
5.
DND FWD NO.
0.
FWD CANCEL
•
Press
ENTER
.
•
Scroll to or dial
1. FORWARD TYPE
and scroll to or dial the desired for-
ward type.
•
Press
ENTER
to activate the desired call forward type.
•
Press
CANCEL
to return to main menu.
OR
•
Press
END
to exit programming.
6.
ALARM REMINDER:
Allows you to set an Alarm Reminder. Up to three alarms
may be set.
•
Scroll or dial option number
6. Alarm Reminder
.
•
Scroll or dial the desired Alarm number (Alarm 1-3).
•
Press
ENTER
.
•
Enter Alarm Type.
0.
NOT SET: Disables alarm.
1.
TODAY: Rings alarm one time only, on the day set.
2.
DAILY: Rings alarm daily at time set.
•
Press
ENTER
.
•
Display confirms setting and returns to that alarm set menu.
•
Scroll up to set
ALARM TIME
.
•
Press
ENTER
.
•
Enter
ALARM TIME
(Military Format).
•
Press
ENTER
.
•
Display confirms setting.
•
Press
CANCEL
to return to main menu.
OR
•
Press
END
to exit programming.
58
DS 5000
Home Page
Table of Contents
