37
CONVENIENCE FEATURES
DO NOT DISTURB
Use this feature when you want to block calls to your keyset.
•
While on-hook, press the
DND
button or dial
401
. The
DND
button lights
steady red to remind you of this mode.
•
To cancel DND, press the
DND
button again or dial
400
. The
DND
light turns
off. You can make calls while in the DND mode.
NOTES:
1.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button.
2.
If you place your keyset in DND mode and you do not have a
DND
button,
your
TSI
button will flash to indicate DND status.
ONE TIME DND
If you are on a call and you do not wish to be interrupted while on that call, you
can press the
DND
button and place your station in Do Not Disturb. When you
hang up at the end of the call, DND will be automatically canceled and your key-
set will be able to receive new calls. This feature requires a
DND
button.
MUTE
You can mute the handset transmitter or the microphone during any conversa-
tion:
•
Press the
MUTE
button. It will light red.
•
To resume speaking, press the
MUTE
button again. The light turns off.
BACKGROUND MUSIC
When a music source is supplied, you may listen to music through the speaker in
your keyset:
•
While on-hook, press the
HOLD
button to hear music.
•
Press the
HOLD
button again to turn music off.
You can set the level of background music by using the
VOLUME
buttons while lis-
tening to the music. This does not affect the speakerphone level.
NOTES:
1.
Display keyset users can view message indications and return them in any
order.
.
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before you begin dialing.
3.
If a message has been left at your keyset by a keyset in Auto Answer, you must
manually cancel the message after it has been returned.
PROGRAMMED MESSAGES
When you will be away from your phone for any length of time, you can leave a
programmed station message. Display stations calling you will see this message
and be informed of your status or follow your instructions.
•
Dial
48
plus any of the message codes (
01–20
) listed on the back of this user
guide.
•
To cancel any of these messages you might have selected, dial
48
plus
00
.
•
Press
TRANSFER
to exit and store your selection.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button.
You can have multiple programmed message buttons (
PMSG
) and each one can
have a different message code:
•
Press any programmed message (
PMSG
) button. The message is set and the
button will light red. Press the button again to turn off.
•
Pressing another programmed message (
PMSG
) button will turn the previous
one off and set a different programmed message.
36
Table of Contents
ITP-5121D
Home Page
