Samsung OfficeServ 7000 Series Programming Manual Download

Page: 128 / 487

CHAPTER 2. MMC Programming

2-90

[308] ASSIGN BACKGROUND MUSIC SOURCE

Assigns a background music source to phones. There is one internal music source and two

additional external music sources are provided if each MIS card is installed in the system.

If 3 Cabinet system, external music source are six.

The default directory numbers for the music sources are 371 (internal), 372~ 377 (external).

CONDITIONS

To use an external sound source, connect the corresponding port of the MOH source to the

external sound source of the MIS card or the misc port of MP10/11 card in OfficeServ 7100.

If ‘NONE’ is set for background music or if a sound source is not connected to the external

sound source port designated as the background music source, music will not be played

even if the background music function is enabled.

DEFAULT DATA

NONE

ACTION

DISPLAY

1) Press Transfer button and enter 308.

Display shows current setting.

[201] BGM SOURCE

BGM SOURCE:NONE

2) Dial phone number. (e.g., 205)

[205] BGM SOURCE

BGM SOURCE:NONE

Use Volume button to scroll through phone numbers

and press Right Soft button to move the cursor.

Select all stations.

[ALL] BGM SOURCE

BGM SOURCE:?

3) Enter source number. (e.g., 3761)

[205] BGM SOURCE

BGM SOURCE:3761

Press Volume button to make selection and press

Right Soft button to return to step 2.

4) Press Transfer button to save and exit.

Press Speaker button to advance to next MMC.

RELATED ITEMS

MMC 309

ASSIGN STATION MOH SOURCE

MMC 408

ASSIGN TRUNK MOH SOURCE

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands