Samsung OfficeServ 7000 Series Programming Manual Download

Page: 232 / 487

CHAPTER 2. MMC Programming

2-194

(Continued)

Option

Description

TYPE (cont’d)

d) The callers place in queue is always maintained.

Additional programming for this type of UCD group is in MMC

607. There is a maximum of 20 UCD groups available on a

system due to availability of system resources.

3 AA: This is used to group a number of AA ports. An Auto Attendant

(AA) card must be installed in the system to do this.

4 BI-VMS: This is the voice mail group for the Built-In Voice Mail card.

5 MESSAGE: Used to group a number of extensions to serve as a

message desk or message group. When one of the stations in this

type of group leaves a message to another station the messaged

station will return the message to the message group so any

member can answer the call. If a station is a member of more than

one message group, then any message indications made by that

station would be for the first numerical message group they are a

member of. It is not recommended to program stations in to multiple

station groups.

6 S0 STN GRP: This is used to group a number of S0 stations for a

video conference.

7 VMSUCD GRP: This is used to collect UCD queuing prompts from

the SVMi-20. The group members will be the VM ports.

8 MCS GROUP: This group is used to assign MCS ports for MCS

conference feature.

9 IVR GROUP:: This group is used to assign IVR ports.

10 VCS GROUP:: This group is used to assign VCS ports.

RING MODE

Each group can have one of the following ring modes. This will decide

how calls are placed to the group.

0 SEQUENTIAL: The stations listed as ‘members’ (see below) will be

called on a ‘first available’ basis. Calls will first go to the first member; if

the first member is busy, calls will go to the second member; if the

second member is busy, calls will go to the third member, and so on.

This type of group is useful for placing the bulk of the incoming calls with

a selected individual, and other members only getting the calls when

that member is busy. The number of members allowed for a sequential

group is 48.

1 DISTRIBUTED: The first call will go to the first member, the second

call will go to the second member, the third call will go to the third

member. This type of group is useful for evenly distributing the call

among all group members. The number of members allowed for a

distributed group is 48.

2 UNCONDITIONAL: Calls are placed to all group members

simultaneously.

This reduces the number of members of the groups to 32. If a group

member is busy, they can receive off-hook ring if defined in MMC

300. This ring mode option is not available for UCD or VMAA

groups. The SGR INC BUSY option is not available for unconditional

ring mode.

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands