Samsung OfficeServ 7000 Series Programming Manual Download

Page: 334 / 487

CHAPTER 2. MMC Programming

2-296

[750] SVM SYSTEM

This MMC is used for the Samsung Built-In Voice Mail card.

There are four options available in this MMC:

Option

Description

SVM AUTO SETUP

When the Built-In Voice Mail card starts, part of the power up

procedure will download data from the system to determine time,

date, what mailboxes to create, and system numbering plan.

This must be done at least once, but once done this download

feature can be turned NO to save boot up time.

RESTART SVM

If this option is set to YES the Built-In Voice Mail card will

immediately restart according to the download OPTION specified

above. (This option may not be available in certain OfficeServ

models.)

SVM TYPE

This option is determine which type of VMS will be used among

SVM CARD, SVM-400, IP-UMS, MP-SVM.

(This option may not be available in certain OfficeServ models.)

DOWNLOAD

OPTIONS

This option is determine which type of Tel number will be download

VM.

Option

Description

STATION NAME

This option is determine whether download station name or not.

DLI/SLI

This option is determine whether download DLI/SLI tel number or

not.

DESKTOP ITP

This option is determine whether download IP phone tel number or

not.

WiFi PHONE

This option is determine whether download WiFi phone tel number

or not.

SIP PHONE

This option is determine whether download SIP phone tel number

or not.

VIR DLI/SLI

This option is determine whether download VIR DLI/SLI tel number

or not.

S0 TERMINAL

This option is determine whether download BRI S0 tel number or

not.

SPNET STN

This option is determine whether download SPNET STN tel

number or not. (In case of MMC824 MBX option is YES, it will be

download)

MOBEX STN

This option is determine whether download MOBEX STN tel

number or not.

STN GROUP

This option is determine whether download STN GROUP tel

number or not.

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands