Samsung OfficeServ 7000 Series Programming Manual Download

Page: 347 / 487

OfficeServ 7000 Series Call Server Programming Manual

2-309

[760] ITEM COST TABLE

This MMC provides a means to assign a code to a billable item along with a 10-character

name for the item. There are a maximum of 100 entries (00 to 99) in the table with item 00

reserved as the code for room deposits, 01 reserved as the code for phone deposits and

items 89 to 99 reserved for other PMS stream items.

These item codes, with the exception of codes 93 to 99, will appear on the guests’ bills at

checkout and will serve to identify what each charge on the bill is for. The room bill, when

printed, will also show telephone calls with an item designation of TEL and the name field

will show the number dialed. In addition to the name, up to eight of the tax codes or rates

defined in MMC 761 can be applied to each item.

PRE DEFINED CODES

Code

Description

Room Deposit

This is the code used for pre-pay room deposits.

Phone Deposit

This is the code used for pre-pay phone deposits.

02-88

User-Assignable code

W/UP SET

A wake up call was set.

W/UP ANS

A wake up call was answered.

W/UP N/ANS

A wake up call was not answered.

W/UP CANCL

A wake up call was cancelled.

Check In

A guest has checked into a room.

Check out

A guest has checked out of a room.

Available

A room has been flagged as AVAILABLE.

Occupied

A room has been flagged as OCCUPIED.

Clean Room

A room has been flagged as NEEDS CLEANING.

Fix Room

A room has been flagged as NEED MAINTENANCE.

Hold

A room has been flagged as HOLD.

CONDITIONS

This function can be used only when the Hotel function is enabled in MMC 813, HOTEL

OPERATION.

ENTERING CHARACTERS

Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME.

DEFAULT DATA

NO ENTRIES

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands