Samsung OfficeServ 7000 Series Programming Manual Download

Page: 426 / 487

CHAPTER 2. MMC Programming

2-388

[839] SIP USER

This is the program to register to outbound SIP server on per user bases, using each pair of

username and password.

In-site Information

Parameter

Description

Default

USERNAME

Alphanumeric username when registering to interacting

Outbound SIP Server.

AUTH UID

This is the username which is used if the authentication

is required from the SIP server. This is the item which is

used for registering the individual number.

AUTH PWD

This is the password which is used if the authentication is

required from the SIP server. This is the item which is

used for registering the individual number.

TEL NO

This numbers are used to match alphabetical usernames

to internal CLI and DDI numbers. (Matched to CLI for

outgoing, and DDI for Incoming)

Out-site Information

Parameter

Description

Default

SITE URL

When dialed number is matched with TEL NO in this

table, this value should be put into To-Header in outgoing

INVITE message.

TEL NO

This numbers are used to match with dialed number.

When matched, system considers the dialed number as a

medium for converting from/to values to alphabetical

values specified in SITE URL and CLI NAME in this table.

CLI NAME

When dialed number is matched with TEL NO in this

table, this value should be put into From-Header in

outgoing INVITE message.

ROUTING

When dialed number is matched with TEL NO in this

table, this specifies the SIP CARRIER to which outbound

message is transferring.

DEFAULT

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands