Samsung OfficeServ 7000 Series Programming Manual Download

Page: 432 / 487

CHAPTER 2. MMC Programming

2-394

[841] SYSTEM IP OPTIONS

This MMC provides various proprietary Samsung VoIP and IP integration options.

The options set in this MMC apply system wide.

Option

Description

Default

PHONE VERSION

Sets running IP-based phone and new phone software

version with the system.

0 DS-5012L:

1 ITP-5012L:

2 ITP-5000D:

3 WIPM APPL: Wireless IP-based mobile phone

software.

4 SOFT PC: IP phone emulation on PC (Soft Phone

application)

5 SOFT PDA: IP phone emulation on PDA (Soft

Phone application)

6 ITP-5112L:

7 ITP-5100D:

8 ITP-VIDEO:

9 DS-5012LE:

10 WIPM BOOT: Wireless IP-based mobile phone

boot program.

11 SOFT-VIDEO:

12 ITP-SIMPLE:

13 SOFT MENU: Soft menu version

NONE

PHONE TFTP IP

Sets phone software upgrade TFTP server IP address. 0.0.0.0

ITP REGISTRATION

Defines the method that IP-based phones use to

0 TYPE:

a) SYS PSWD: System will authenticate the IP-

based phones with the value in ITP

REGISTRATION: PSWD parameter (see 1,

below).

B) PHONE PSWD: System will authenticate the

IP-based phones according to entries made in

MMC 840.

c) DISABLE: System will not authenticate

IP-based phones.

SYS

PSWD

1 PSWD: This is a system-wide password used for

registration of IP phones.

‘1234’

EASYSET OPTION

Sets EasySet link via LAN option with the system.

0 PSWD: This is a system-wide password used for

authentication of EasySet server.

‘1234’

1 ALIVE: This is an EasySet link via LAN alive check

timer.

0 SEC

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands