Samsung OfficeServ 7000 Series Programming Manual Download

Page: 72 / 487

CHAPTER 2. MMC Programming

2-34

[118] CONFERENCE GROUP

Allows the system administrator or technician to set conference groups for any station.

A station is allowed up to five conference groups, and each group can include 4 members

(excluding the station itself). Names can be allocated to groups.

Conference members can be other stations, station groups, and external telephone numbers

(which must include the outgoing access code).

CONDITIONS

Only stations set to use conference groups in MMC 612 can be selected here. Large LCD

phones are automatically set to use conference groups.

ENTERING CONFERENCE GROUP NAME

Refer to ‘ENTERING CHARACTERS’ in MMC 104, STATION NAME.

DEFAULT DATA

NONE

ACTION

DISPLAY

1) Press Transfer button and enter 118.

Display shows:

[201] GRP (1)NAME

2) Dial station number. (e.g., 205)

[205] GRP (1)NAME

Press Volume button to select station and press Right

Soft button to move cursor.

3) Dial 1~5 to select group.

[205] GRP (1)NAME

Press Volume button to select group and press Right

Soft button to move cursor.

4) Dial 0 to select name or dial 1~4 to select member.

[205] GRP (1)MBR1

NONE

Press Volume button to select name or member and

press Right Soft button to move cursor.

Press Left Soft button to return to step 3.

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands