Samsung OfficeServ 7000 Series Programming Manual Download

Page: 96 / 487

CHAPTER 2. MMC Programming

2-58

[208] ASSIGN RING TYPE

Allows programming of single lines to have ICM ringing, Trunk Line ringing and data

secure. With the many types of external ringing devices, all configurations can be met.

All devices will also have a positive disconnect signal. Do not make VM/AA ports data;

this will return them to a single line port and stop voice mail integration.

Type

Description

ICM RING

Follows normal SLI ring cadence.

CO RING

Follows Trunk line ring cadence.

DATA RING

Follows Trunk line ring cadence and does not support off-hook ring.

DEFAULT DATA

ICM RING

ACTION

DISPLAY

1) Press Transfer button and enter 208.

Display shows:

[209] RING TYPE

ICM RING

2) Dial station number. (e.g., 205)

[205] RING TYPE

ICM RING

Press Volume button to select station and press Right

Soft button to move cursor.

3) Dial 1, 2 or 0 to select port type. (e.g., 2)

[205] RING TYPE

DATA RING

Press Volume button to select type and press Left or

Right Soft button to return to step 2 above.

4) Press Transfer button to save and exit.

Press Speaker button to save and advance to next

MMC.

RELATED ITEMS

NONE

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands