OfficeServ 7100 System Description
© SAMSUNG Electronics Co., Ltd.
1-3
1.1.2 System Architecture
OfficeServ 7100 is configured of the main device with a basic cabinet and OfficeServ
solution. The Main device cabinet is a one stage shelf composed of three slots and consists
of a control part on the main slot and two subscriber parts on the universal slot.
OfficeServ solution is established in an additional server and uses the solution that is the
same as that of OfficeServ 7200 and 7400. However, the limited modification concerned
with the system structure is allowed.
The service configuration diagram of OfficeServ 7100 system is shown in the figure below:
Figure 1.1 Configuration of OfficeServ 7100 Service
Voice Trunk Line Part
The voice trunk line part is configured with digital trunk lines and analog trunk lines.
TEPRIa/TEPRI2 functions as Primary Rate Interface (PRI) digital trunk line on a board,
sends/receives voices through the trunk line and transmits the data information of 64 kbps
per channel. 8TRK provides the Caller ID (FSK CID) function within a board in default.
If 4TRM option board is mounted on the UNI board, it operates as a voice trunk board and
supports an analog trunk line, and provides the CID & PRS.
….
SMT-W5100
Notebook
xDSL Modem
OfficeServ Solution
- OfficeServ Call
- OfficeServ Operator
- OfficeServ ACD
- OfficeServ DataView
- OfficeServ Messenger
- OfficeServ Softphone
- OfficeServ Easyset
- OfficeServ News
- OfficeServ IP-UMS
Basic Cabinet
xDSL liine
PSTN
OfficeServ 7100
WAN
WLAN
Regular Phone
Digital Phone
IP Phones
LAN
….
AP(SMT-R2000)