OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 MAY 2009
MMC: 501
DISPLAY DELAY TIMER
This timer controls the duration a display is shown in the
LCD display. This timer also controls the duration of time
that error tone is heard.
DOOR LOCK RELEASE
This timer controls the duration of time the door lock relay
will be activated.
DOOR RING DETECT
This timer controls the duration of time before a call is
answered by the door phone.
DOOR RING OFF TM
This timer controls the duration of ringing at the door ring
destination before automatically canceling.
E-HOLD RECALL TM
This timer controls the duration of time a call is held
exclusively at a station before recalling.
FIRST DIGIT TIME
This timer controls how long the system will wait for
dialing to begin before dropping the dial tone and
returning the user to error tone.
HOK FLASH MAX TM
This timer monitors the duration of a hookswitch flash to
ensure that the flash is valid and not a line noise or an
accidental hookswitch bounce (LONGEST DURATION).
HOK FLASH MIN TM
This timer monitors the duration of a hookswitch flash to
ensure that the flash is valid and not a line noise or an
accidental hookswitch bounce (SHORTEST DURATION).
HOOK OFF TIME
This timer controls the time before dial tone is sent to a
single line station.
HOOK ON TIME
This timer sets the minimum amount of time that the
system will recognize as an SLT hang up.
INQUIRY RELEASE
This timer monitors the duration of the interaction of the
soft key to determine when to return the LCD back to a
normal status. This timer affects only display phones.
INTER DIGIT TIME
This timer controls the grace period between dialing
valid digits before dropping the call and returning the
user back to error tone.
ISDN INTERDIGIT TIMER
This timer controls the grace period between dialing
valid digits and the end of the dialing string on an ISDN
call.
Home Page
Table of Contents
