OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 MAY 2009
MMC: 502
STATION-WIDE TIMERS
DESCRIPTION:
Allows certain station timer values to be changed on a per-station basis or for all
stations.
1 NO ANS FWD
This timer controls how long the station will ring before
Forward on No Answer takes place. (Range: 001- 250 sec.)
2 DTMF DUR.
This timer governs the duration of DTMF digits which are
transmitted to an external VM system port. This can be used
when a VMS system fails to recognize the default DTMF
digit duration being transmitted from the DCS SLT port.
(Range: 100- 9900 m sec.)
3 F - DGT DELY
This timer will be valuable for the system administrator to
insert a suitable delay before generating DTMF digits for In
Band Integration. (Range: 00- 9900 m sec)
4.
OFFHK
SEL
This timer controls the grace period before placing an
internal/external call as programmed in MMC 306. (Range:
000- 250 sec.)
5. EFWD DELAY
This timer controls how long a station will ring before the call
is forwarded to an external number. (Range: 000 – 250 sec.)
6. CC RNG DLY
When the station does not answer incoming call within this
time, other stations with the CC key of that station will ring
together. This feature only applies to the station call and
station group call does not serviced (Range: 10 sec)
7. PING RING
When this station is a member of a Pickup Group in
MMC
302
and the system
PING RING
option is set to
YES
in
MMC 861
this timer will control the duration a call should
ring at this station before other stations receive ringing. A
setting of
000
means Ping ringing will occur immediately.
The default setting of
255
means no Ping ringing will occur.
The maximum programmable value for this timer is
250
seconds.
255
can only be set from the Installation Tool by
deleting the value and saving.
Home Page
Table of Contents
