OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 JANUARY 2009
MMC: 763
SECOND LCR
DESCRIPTION:
This MMC extends system Least Cost Routing tables to accommodate sites with
very large networks or where specialized dialing formats are required. It uses a table
of 198 entries containing telephone numbers that can be optionally translated and
sent to a custom destination. The options are as follows:
0.
IN DIGIT:
This option determines the dial string to match on. This
number will be dialed after dialing an E-LCR FEATURE CODE.
Up to 16 digits may be entered into this field.
1.
OUT DIGIT:
This is the digit string that will be sent to the NEXT ROUTE
instead of the IN DIGITS. Up to 16 digits may be entered into
this field.
2.
USE LCR NUM:
This option determines which E-LCR FEATURE CODE should
use this digit translation. Valid entries are as follows:
ALL
All E-LCR feature codes will use this translation. This is the
default setting.
E-LCR1
Enter the E-LCR1 FEATURE CODE from MMC 724. This
setting makes the digit translation active only for calls that
are dialed after the E-LCR1 FEATURE CODE.
E-LCR2
Enter the E-LCR2 FEATURE CODE from MMC 724. This
setting makes the digit translation active only for calls that
are dialed after the E-LCR2 FEATURE CODE.
E-LCR3
Enter the E-LCR3 FEATURE CODE from MMC 724. This
setting makes the digit translation active only for calls that
are dialed after the E-LCR3 FEATURE CODE.
E-LCR4
Enter the E-LCR4 FEATURE CODE from MMC 724. This
setting makes the digit translation active only for calls that
are dialed after the E-LCR4 FEATURE CODE.
Home Page
Table of Contents
