CHAPTER 2. MMC Programming
OfficServ 7200 Programming Guide
Samsung Business Communications
2-74
[304] ASSIGN EXTENSION/TRUNK USE
Allows you to select which stations are allowed to make calls through C.O. lines or
to answer calls for C.O. lines (on a station and trunk use group basis).
CONDITIONS
y
Stations are set within use group numbers 001~300 and trunks are set within use group
numbers 301~500 in MMC 614, ASSIGN USE GROUP.
y
If a station group is set to NO Dial, stations cannot place calls on that trunk group.
y
If a station group is set to NO Answer, stations cannot answer incoming calls on that
trunk group.
Note: MMC 406, Trunk Ring Assignment, overrides this MMC for the Answer option.
DEFAULT DATA
DIAL: YES
ANS: YES
ACTION DISPLAY
1. Press Transfer button and enter 304.
Display shows:
(001) USE (301)
DIAL:YES ANS:YES
2. Dial the station use group number (e.g., 005)
OR
(005) USE (301)
DIAL:YES ANS:YES
Press Volume button to select station use group
and press Right Soft button.
OR
Select all station use groups.
(ALL) USE (301)
DIAL:YES ANS:YES
3. Dial the station use group number.(e.g., 304)
OR
(005) USE (304)
DIAL:YES ANS:YES
Press Volume button to select trunk use group
and press Right Soft button.
OR
Select all trunk use groups.
(005) USE (ALL)
DIAL:YES ANS:YES
4. Press Volume button to select YES/NO option.
OR
(005) USE (304)
DIAL:NO ANS:YES
Dial 1 for YES or 0 for NO and press Right
Soft button to move cursor to ANS option.
