CHAPTER 2. MMC Programming
OfficServ 7200 Programming Guide
Samsung Business Communications
2-120
No
Option
Description
NB PLAN
Used to select the type of the Calling Party Number Plan to send to the net-
work.
UNKNOWN
Unknown numbering plan
ISDN
ISDN numbering plan (CCITT E.163-164)
DATA
Data numbering plan (CCITT X.121)
TELEX
Telex numbering plan (CCITT F.69)
NATIONAL
National standard numbering plan
PRIVATE
Private numbering plan
5
EXTEN Local
numbering
plan
OPTIONS FOR BRI PORTS PROGRAMMED AS STATIONS
No
Option
Description
0
ANY CHANNEL When this option is set to YES, the system will place calls on any free
channel of that BRI if the channel chosen by the user is busy (e.g., Pre-
ferred channel selection). If set to NO, the user will receive a busy signal
if they attempt to access a busy channel even if the other channel on
that BRI is free (e.g., Exclusive channel selection).
1
POWER FEED
This field determines if power to a BRI access will be supplied (YES or
NO)
CONDITIONS
y
A BRI card must be installed in the system. Otherwise, the ‘NO BRI CARD’ message
is displayed.
y
If any changes are made in this MMC, the BRI card that is affected by these changes
MUST be restarted using MMC 418 in order for the changes to become effective.
DEFAULT DATA
For BRI Ports programmed as Trunks:
CHANNEL ANY: YES
BRI MODE: P-P DDI
DLSEND: OVERLAP
CLIP TABLE: NONE
NB TYPE: NATIONAL
NB PLAN: ISDN
For BRI Ports programmed as Stations:
CHANNEL ANY : YES
POWER FEED : NO
