CHAPTER 2. MMC Programming
OfficServ 7200 Programming Guide
Samsung Business Communications
2-169
CONDITIONS
y
A station can be assigned to all station groups. A station group can normally accom-
modate up to 48 members, but only up to 32 members if the RING MODE is UN-
CONDITIONAL.
y
To enable off-hook ring for incoming calls to busy members, set OFFHOOK RING in
MMC 300, CUSTOMER ON/OFF PER STATION, to ON. Even in this case, however,
the off-hook ring is enabled only when the RING MODE is UNCONDITIONAL.
DEFAULT DATA
NORMAL GROUP
ACTION DISPLAY
1. Press Transfer button and enter 601.
Display shows:
[501] STN.GROUP
TYPE:NORMAL GRP
2. Dial group number (e.g., 505)
OR
[505] STN.GROUP
TYPE:NORMAL GRP
Press Volume button to select group and
Press Right Soft button to move cursor.
3. Dial feature option number (0-7, e.g., 0)
OR
[505] STN GROUP
TYPE:VMAA GROUP
Press Volume button to scroll options and press
Right Soft button to move cursor.
4. DIAL group type (e.g., 1)
OR
[505] STN GROUP
TYPE:VMAA GROUP
Press Volume button to make selection and
press Left Soft button to move cursor to TYPE.
5. Dial feature option number (0-6, e.g., 1)
OR
[505] STN GROUP
RING:DISTRIBUTE
Press Volume button to scroll options and
press Right Soft button to move cursor.
6. Dial ring option (0-2, e.g., 0)
OR
[505] STN GROUP
RING:SEQUENTIAL
Press Volume button to make selection.
Press Left Soft button to move cursor
back to RING or press Right Soft button to
return to step 2.
