CHAPTER 2. MMC Programming
OfficServ 7200 Programming Guide
Samsung Business Communications
2-210
[712] LCR ROUTE TABLE
The LCR ROUTE TABLE is responsible for selecting a specific trunk group in the comple-
tion of an outward bound call. This table works in conjunction with LCR DIGIT TABLE,
LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED DIGITS TABLE. After you
dial a valid digit string, the system uses the LCR ROUTE TABLE to select a specific pre-
determined trunk group. There is a maximum of 32 routes available.
If more than one trunk group is available for call completion, the system uses the first des-
ignated trunk group and then the succeeding trunk groups. If all trunk groups are busy in a
selected route, call queue becomes active and allocates trunks as they become available.
DEFAULT DATA
NONE
ACTION DISPLAY
1. Press Transfer button and enter 712.
Display shows:
LCR ROUTE (01:1)
C:1 G:NONE M:---
2. Dial LCR ROUTE table number (e.g., 05)
OR
LCR ROUTE (05:1)
C:1 G:NONE M:---
Press Volume button to selected table and press
Right Soft button to move cursor.
3. Dial TIME BAND index number 1-4 (e.g., 2)
OR
LCR ROUTE (05:2)
C:1 G:NONE M:---
Press Volume button to selected index and press
Right Soft button to move cursor.
4. Dial LCR COS number 1-8 (e.g., 4)
OR
LCR ROUTE (05:2)
C:4 G:NONE M:---
Press Volume button to selected COS and press
Right Soft button to move cursor.
5. Dial TRUNK GROUP access code (e.g., 801)
OR
LCR ROUTE (05:2)
C:4 G:801 M:---
Press Volume button to selected access code and
press Right Soft button to move cursor.
