31
2. Dial the station number (e.g.,
205
) OR
[205] NO ANS FWD
press
UP
or
DOWN
key to select the
010 SEC
station and press the right soft key OR
OR
press
ANS/RLS
to select all stations
[ALL] NO ANS FWD
and press the right soft key
010 SEC
3. Press
UP
or
DOWN
key to select the
[205] DTMF DUR.
station timer and press the right soft key
0100 MS
→
4. Enter the new value via the dial pad,
[205] DTMF DUR.
e.g.,
0300
and the system will return
0100 MS
→
0300
to step 2
5. Press
TRSF
to store and exit
programming OR press
SPK
to store
and advance to the next program
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a CID or
ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table, [no CID name] or [no ANI name] will be displayed.
The translation table consists of
1000
entries in the
OfficeServ 500 M
and
OfficeServ 7100,
and
OfficeServ 7200
and
OfficeServ 7400
systems or
2000
entries in the
OfficeServ 500 L
system or
500
entries in the
OfficeServ 100
sys-
tem with each entry comprised of a ten digit telephone number and a 16 digit
name.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP
&
DOWN -
Used to scroll through options.
KEYPAD -
Used to enter selections.
SOFT KEYS -
Move cursor left and right.
SPK -
Used to store data and advance to next MMC.
HOLD -
Used to clear previous entry.
ACTION
DISPLAY
1.
Press
TRSF
and then dial
728
TRANSLATION:(001)
Display shows first entry
DIGIT:
2.
Dial entry number (e.g.,
005 or 0005
)
TRANSLATION:(005)
OR use
UP
and
DOWN
to scroll
DIGIT:_
through entries and press right
soft key to select entry
3.
Enter telephone number and press
TRANSLATION:(005)
right soft key to advance to name entry
DIGIT:3054264100
OR enter telephone number and press
left soft key to return to step 2 above
4.
Enter the name using the method
TRANSLATION:(005)
SAMSUNG TELECOM
and press right or left soft key to
return to step 2 above
OR press
SPK
to save and advance
to next MMC OR press
TRSF
to
save and exit programming
DEFAULT DATA: NONE
32
Home Page
System Admin
Table of Contents
