background image

OfficeServ 7200 

USER INSTRUCTIONS 

TECHNICAL MANUAL 

PART 1   MAY  2009 

 

1.5

1.3 CHANGING YOUR PASSCODE 

Each keyset user can set or change his/her individual passcode. This passcode is used 
to lock or unlock keysets, for toll restriction override and to access the DISA feature. 
 
NOTE: Default passcodes cannot be used for toll restriction override or for DISA 
access. 
 

ACTION 

 

 

 

 

 

 

DISPLAY 

 

1. Press 

the 

transfer key

 followed by 

101

 

Display shows 

[201] PASSCODE 
OLD CODE:_ 

   

 

2.  Enter the existing passcode (default = 1234) 

[201] PASSCODE 
OLD CODE:**** 

   

 

3.   Enter the new passcode 

[201] PASSCODE 
NEW CODE:_ 

   

 

4.  Reenter the new passcode to verify the number 

If reentered correctly, display shows 

[201] PASSCODE 
VERIFY  :SUCCESS 

   

 

5. Press 

the

 transfer key 

to save and exit 

 

 

Home Page

Table of Contents

Summary of Contents for OfficeServ 7200

















































































































































































































































































































































































Reviews: