OfficeServ 7200
USER INSTRUCTIONS
TECHNICAL MANUAL
PART 1 MAY 2009
1.8
1.5 SETTING YOUR ANSWER MODE
Each keyset can have its answer mode for intercom calls set to one of the following
options:
RING MODE—The station will ring in one of eight custom ring patterns. Calls are
answered by pressing the
ANS/RLS
key or lifting the handset.
AUTO ANSWER MODE—After giving a short attention tone, the station will
automatically answer calls on the speakerphone. When a C.O. line is transferred to a
station in Auto Answer, the screened portion of the call will be Auto Answer, but the
keyset will ring when the transfer is complete if the user has not pressed the
ANS/RLS
key or lifted the handset.
VOICE ANNOUNCE—The station will not ring. After a short attention tone, callers can
make an announcement. The called party must press the
ANS/RLS
key or lift the
handset to reply.
ACTION
DISPLAY
1. Press
the
transfer key
followed by
103
Display shows
[201] ANS MODE
RING MODE
2. Dial
0
,
1
or
2
to change the ring mode, e.g.,
2
OR
[201] ANS MODE
VOICE ANNOUNCE
Press
UP
or
DOWN
to select the ring mode
3. Press
the
transfer key
to store and exit
Home Page
Table of Contents
